Help - Palmer Fatty

[thumper]

I just got in my Palmer Fatty for my CO2 cocker/sniper and the pressure stabilizes while firing, but climbs 200%+ after a few minutes of sitting idle.

The little instruction guide says "cycle 3000 rounds" to help break in seals.

I email palmer yesterday - no reply yet.

anyone have similar issue.
any tips?

[Trigga Nometry]

Hmmmm....I have experiance with the Palmer Stabilizer using it for high pressure but not for a low pressure Fatty. I know that I had about a 3,000 round break in period for the Stabilizer. Once it was broken it, it well....stabilized. I never got creeping like you have seen.

What pressure are you running the Fatty at?

[scpaintballer01]

stuipd q. but is there a leak anywhere? my friend had one in his angels reg and didnt know it cause it was barely audible. Some of the most simple things can be over looked some times.

[thumper]

it stabilized after a around 500 cycles but the creeping messed up the gauge that comes on it. It now reads a minimum of 200psi when degassed.

I think im operating around 400psi hitting the gun operating on co2.
see pics
http://www.scroadkill.com/marker-evo...autococker.htm