Deadlywind Marker

[Junkie]

Found on automags.org

Deadlywind is about to work/or is working on a new marker which has to come out next year on the market. Here is a prototype. What one sees in the back, will not move probably...

Detail:
- more easily than 1.6 lbs
- new spoolvalve platform
- Antichoosystem similarl to the AGD Level10

[Justin88]

ooo neat

[Rembrandt]

weird but it looks awesome.

[HeadHunter]

Don't like the reg too much. And the rear bolt which looks to be plastic is sticking out way too much.

[Grendel]

Originally Posted by HeadHunter

Don't like the reg too much. And the rear bolt which looks to be plastic is sticking out way too much.

Note this is a PROTOTYPE not the finished product. The intent of a prototype is to work out the bugs in operation, once that is done they'll work on aesthetics. By the way that reg you don't like much is a Palmer Stabilizer one of the better regs on the market (IMHO)

[madden]

that looks wicked

[scrappy]

from its looks it looks like a simple marker, so small and not much to see.

[DeepFreeze]

Originally Posted by Grendel

Note this is a PROTOTYPE not the finished product. The intent of a prototype is to work out the bugs in operation, once that is done they'll work on aesthetics. By the way that reg you don't like much is a Palmer Stabilizer one of the better regs on the market (IMHO)

Come on Grendel, you know it is how it looks, not how it works that is the most important thing. Dang, next thing you will be wanting pants that actually fit and don't hang around your knees....Sheesh!

[warpedx]

Nice and compact. I'm guessing it has a spool on the lower tube, which feeds air to the tope tube. The top tube takes that air and uses it to move the bolt forward with the antichop stuff, and then vent the air behind the ball.
Looks like cocker threads too.
As far as the reg goes, I'm torn. It's ugly, but it is Shiny!!