I havent had a lot of experience with the E2 and I was wondering if anyone else here has had experience with them? If so did you like it?

I have both a karnivor and another old school right feed cocker that I put an e2 on. overall, I have loved the ease of using it. once you learn the menus, it is easier than ever to time the gun and keep it going. one note: a thing I learned early on that drove me crazy at first was that it is absolutely critical to keep the sear lubricated. if you don't, the gun will seem to cycle without firing as if the timing is off or the battery is low. every 10 cases or so (just to be sure), disasemble the gun, drop the grip frame just a little bit, and squirt some high quality adhesive lubricant on the sear where it catches the lug. stuff that's designed to lube mechanical gears works great. anyways, good luck!

adhesive lubricant...?

Almost only counts in horseshoes, hand grenades, and nukes!

dow 33 type stuff

I use 3-in-One Professional brand High Performance Lubricant. It's a synthetic PTFE lube apparently very similar to what Eclipse recommends. Plus, it is pretty common and fairly cheap (4 bucks a can or so). Oh, it works, too. Wurth brand Adhesive Lubricant is ideal, but it is hard to find and 17 bucks a can.