Help!!! With Omens Trigger Adj!!

[Tippmann Woods Ball]

Ok i got my omen today around 1:30, i love it... it is the best, now immidiently i started to mess around with the trigger, and i found that the bottom skrew that you skrew in and out to adj the space when the trigger is fired is loose, i skrew it in and then i start walkin it for about 12 sec, i stop, this is without air, and the skrew has backed it self out, so basicly each time i pull the trigger, the skrew is soo loose that it doesent stay and backs out. I was wonder what to do to correct this, im thinkin of putin something on the skrew to make it have a tighter fit, but its a very small skrew with very small threads. What should i do? And one more thing, is it normal if the beaver tail a little crooked, the back rod doesnt strike it or anything, and you can barely notice it. Thank alot guys!

PS, The threads Are Not striped!

[DeepFreeze]

Throw a little blue loctite on there. Do not use green or red. If you use those two you will never be able to adjust it again. After you adjust it to where you want it let it sit for a while and it will set up and the loctite will provide enough friction to hold the screw in place.

[ShadowWalker]

The beavertail is crooked on most, if it isn't cause problems don't worry about it. Look at the red inner block and tell me if you see two small plastic set screws in it. they should be on each side of the beaver tail, one will be close to the top, the other close to the bottom.

[Tippmann Woods Ball]

so what about the two skerws on the Red Inner block.. Oh and im gona pick up some lock tight tomorrow, im chargein her right now, i sholda got a smaller n2 tank, i have to throw this one over my sholder, it just dont feel right, ive never done it before, i really need a drop,... or ill just get use to it. Thanks for the help guys.

[ShadowWalker]

Does it have those plastic things? If so you can play with those (screw them in or out) to straighten the back block out. What size tank do you have...just out of curiosity.

[Tippmann Woods Ball]

Oh ok the two skrews, ill adj them later. And im currentlly runing a 68/4500 hp crossfire.

[a2nadam]

Ive never shot an Omen with air. How does it shoot?

[ShadowWalker]

Its pretty nice for the design. I mean it will never have as little kick as a true electro, but its no where near what a spyder has due to the adjustable recock pressure. Stock internals are decent (specifically the bolt).

[Tippmann Woods Ball]

I cant even notice the kick if any, i love it, i left it on last night, so the gun gets uber slow when the battery gets low, its chargin now...soo im gona adj my recock pressure and velocity when it gets done chargein. I was ripin with it last night, i choped one ball tho because my recock pressure wasent high enough so the cam feed didnt have enough pressure to kick the ball in the chamber.. oh well no biggie, i still love it just needs some adjments lol.

[spokane]

sound like a nice gun.