Quote:
OK. Everyone knows that u r only cool if u hav a speed feed on top of ur hopper right. well heres a little secret, if u wan to b really cool make ur own. which is exactly what i am going to show u how to do.
***before starting i jus want to say that it is not my fault if u screw up any piece of equipment that u own. thank you***
Now on with it.
Materials:
-pringles top
-sharpie
-soldering iron
-exacto knife attachment for soldering iron
-electrical tape
-cork to a wine bottle (if ur underage, let ur parents drink the wine)
-ruler
-pin
Prodecure:
1.Find the pringles top
2.divide the flat part of the lid into 16 sections by dividing it into 4ths, then 8ths, then 16ths
3.Shade off 3-16ths then skip 1 (Repeat until u go through the whole lid)
4.put the pin throuigh the middle of the pringles top and then into the middle of the wine cork
5.trace around the wine cork
6.now fire up the soldering iron and attach the exacto knife attachment
7.cut away the pieces of the top that r not shaded in
8.put one layer of electrical tape around the inside edge of the topand test to see if it fits on ur hopper (u will have to take ur old top off first)
9.repeat step 8 until u get the tightness of fit that u desire.
10.bend the tabs on the top inward so that paintballs can be filled more easily
11.test with a pod of paint
12.congradulations u hav just made a "quick-feed", now u r one of a select few tha are cool enough to hav one.
**this should turn out to look like a garbage disposal type of speed feed**
|
Taken from ionownersgroup.com
PICTURES ARE ATTACHED TO THIS POST
11-07-2006, 10:39 AM
Linear Mode
