| Register | Blogs | Arcade | Members List | B/S/T | Calendar | Search | Today's Posts | Mark Forums Read | Invite | Links | FAQ |
|
|||||||
| Kingman Spyder, EM1 Discussion Area |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
08-16-2004, 11:49 PM
|
||||
|
||||
|
Help! Switch Removal On Electro Spyder!
Ok my cousin just bought a 5g switch, yes thats what he told me, a 5g switch from radio shack, and he wants to know how to take out the stock switch in his Electra DX and replace it with the New one he just got. Is this possible, hard, and How.
__________________
"Anyone who sees and paints a sky green and fields blue ought to be sterilized." Adolf Hitler Future Ups for Omen New Trigger? z-board for egg 15* Gauge Hopper Information Chart. very helpfull > http://www.pbjunkie.com/forums/showthread.php?t=239 
|
|
#2
08-17-2004, 12:02 AM
|
||||
|
||||
|
First question: Can you solder?
__________________
<a href="http://www.shadowwalkerphotography.com"><img src="http://www.MyOnlineImages.com/Members/shadowwalker/images/banner.gif"/></a>
|
|
#3
08-17-2004, 01:30 AM
|
||||
|
||||
|
to take out the switch you have to knock out the silver pins in the frame(one near switch)whith a allen wrench the size off the hole and a hammer. Then it just comes out. And you will most likely have to do soldery also :uhoh:
|
|
#4
08-17-2004, 03:12 PM
|
||||
|
||||
|
Yeah you're going to have to desolder the old switch and solder the new one. Not difficult by any means, but if you don't know what you're doing you could mess up the entire board.
__________________
<a href="http://www.shadowwalkerphotography.com"><img src="http://www.MyOnlineImages.com/Members/shadowwalker/images/banner.gif"/></a>
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
