Spyder Q/A forum

[spyderman]

as far as a loader I agree that the vl revy is good enough and cheap enough for you gun.If you really want a spyder to be more scenario stlye then check out the thread that has the new spyder mr2 scenario marker.Barrels are going to get you mixed answers from most people,it has alot to do with your own preference.Bore to ball size matches are important in acurracy in which case I like the freak kits,good with both accuracy and to make the marker a little more silent.Freak kits have several different bore sizes included in them

[radict]

Yea I love parts of that marker. I would love to be able to put like the stock of that gun and a tippmann flat line barrel. I know it sounds a little crazy but I still like it and would like to try it. If it doesn't work then I'll look into something else. This is more or less an experiment.

[Rembrandt]

give it a try as long as it doesnt involve messing up the gun to the point where if it doesnt work you can't use it any more. I say it could be done just alot of time and modifying.

[spyderman]

after seeing bunkers super pump and his spyder pump I have to agree,anything is possible

[radict]

Thats what I wanted to hear. And no I'm not going to chance anything. Before I make major mods to the gun itself ( you know stuff you can change back) unless I'm absolutly sure it will work when I'm done.

[radict]

I need some help figuring out my cousins leak. He has a 01 or 02 imagine.
The leak is very small to were he plays with it but will eventually leak out all his air. It sounds like its leaking from inside the bore possibly. You can hear the leak the best from either the feed neck or the barrel. I completely broke down the gun today at the field and replaced all the O rings I could find. ( bolt, valve body, reg, expantion chamber, striker bolt ) same leak.

I was wondering if maybe it could be the valve pin or maybe the valve pin cup seal.

I am searching for answers. Yea I know kingman would fix it no questions asked. I just prefer to understand and be able to fix the marker myself so if it happens at field I will know what is needed.

As always thanks again guys/girls.

[Cruiseman]

Originally Posted by radict

I need some help figuring out my cousins leak. He has a 01 or 02 imagine.
The leak is very small to were he plays with it but will eventually leak out all his air. It sounds like its leaking from inside the bore possibly. You can hear the leak the best from either the feed neck or the barrel. I completely broke down the gun today at the field and replaced all the O rings I could find. ( bolt, valve body, reg, expantion chamber, striker bolt ) same leak.

I was wondering if maybe it could be the valve pin or maybe the valve pin cup seal.

I am searching for answers. Yea I know kingman would fix it no questions asked. I just prefer to understand and be able to fix the marker myself so if it happens at field I will know what is needed.

As always thanks again guys/girls.

Well try hooking up another tank to his gun and see if it leaks, if it does than its his gun, if it dosen't u need to look at his tank.

Basic but can narrow it down a bit

[spyderman]

you may want to check the cup seal

[radict]

Thanks spyderman. I will look more at the cup seal. After research I thought that might be it but wasnt sure.

Do those leak often??

[spyderman]

with the newer model spyders,after extensive use they will.The newer spyders have a plastic cup seal as were the older ones did not.The good thing is they are very cheap to replace