| Register | Blogs | Arcade | Members List | B/S/T | Calendar | Search | Today's Posts | Mark Forums Read | Invite | Links | FAQ |
|
|||||||
| Paintball Talk General Paintball Discussion Area. |
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
09-25-2007, 08:36 AM
|
||||
|
||||
|
What is the Macro Line on the bottom of your gun Made out of?
Ok i need to buy some in a different size for a cannon build. But for the life of me. All the stuff i order is WAAAAAAAY to stiff.
I have all the right fittings. glass Inject nylon safe up to 300 PSI. So... I ask you..?? Polyethylene? Polyurethane? acrylic? blend? Also, what size Tube is it that normally Fits in those Elbows on most guns? 
|
|
#2
09-25-2007, 08:46 AM
|
||||
|
||||
|
Standard macro line goes up to 900 PSI. As long as you're using CO2 or regulated HPA, you shouldn't have a problem with it. 900 is a great reference figure, but my thoughts go to a summer day and a player with macro line on a CO2 gun left out in the sun... The "POW! Shhhhhhhhhhhhhh..." of a ruptured line. Most have 3K BURST pressure. IOW, use common sense...
Last edited by gfgjester; 09-25-2007 at 09:07 AM. Reason: Attack of old & stupid. Corrected pressure - K to 00's
|
|
#4
09-25-2007, 09:12 AM
|
||||
|
||||
|
I found this typical reference, although it is not absolute. Most "super" heavy-duty macro line fits these specs. You too, young Luke, can use the power of the Google!
 Nylon-12 .150" ID .250" OD .050" wall 1000 psi working pressure (3000 psi burst) 0.5" bend radius
|
|
#6
09-25-2007, 09:58 AM
|
||||
|
||||
|
No problem. When I get to the shop, I'll try and find a section of the Dye macroline. It has the specs stamped on it. I'll post them here for you...
|
|
| Thread Tools | |
| Display Modes | |
|
|
Linear Mode
