Dose anyone know of any ghetto mods for a Tippmann 98 custom?

[recon ranger]

If you do post them here in this thread.

[Justin88]

polish internals,blowback vents,cut revievers,shave the letters,cut the site,repaint.

[swampfox44]

Polished internals and blowback vents.

[morph1175]

Straw mod on the sear pin.

[recon ranger]

Thanks for the ideas ya'll!

[Volcano]

Originally Posted by Justin88

polish internals,blowback vents,cut revievers,shave the letters,cut the site,repaint.

Only polish the bolt sliding surfaces, and then only lightly.
If you "sand" it your parts will get sloppy. No real worries but gas efficiency will go down quickly, more erratic velocities, and chops if you don't keep it well lubed.

Use something like "brasso" or other liquid instead of abrasives and you'll be fine!

[Volcano]

Originally Posted by morph1175

Straw mod on the sear pin.

do the straw on the trigger "slop" first
If you use a straw even a little bit too thick on the sear post, you'll wear out your sear and bolt in no time flat!!!

[Sittin_duk]

Clicky pen mod, polish internals....and that's all I got.